ISI Papers With Our Products



Title: The effect of synthesis parameters on morphology and diameter of electrospun hydroxyapatite nanofibers
Journal: Journal of the Australian Ceramic Society
Author: 1. Raheleh Faridi-Majidi, Nader Nezafati, Mohammad Pazouki, Saeed Hesaraki
Year: 2017
Address: 1. Nanotechnology and Advanced Materials Department, Materials and Energy Research Center, Karaj, Alborz, Iran
Abstract: In the present study, hydroxyapatite nanofibers were synthesized by electrospinning. The main focus is based on the effect of adding various ratios of calcium phosphate (Ca-P) sol to polymeric solutions of PVA and PVP with a fixed concentration of 10 and 15% (w/v), respectively, on the morphology and the diameter of the electrospun nanofibers. The electrical conductivity of pure PVA solution was higher than PVP (0.610 versus 0.06 mS/cm). However, by adding Ca-P sol, the solution conductivity increased to 23.5 and 34.4 mS/cm for PVA solution containing 15 (vol%) [A15] and PVP solution containing 25 (vol%) [V25] of the prepared sol, respectively. SEM observations showed that the fiber diameter of sample V25 (average diameter of 150 nm) was thinner and more uniform than A15 (average diameter of 170 nm). FE-SEM of sample V25 confirmed the results of SEM analysis as well. After heat treatment at 600 °C, powder-like particles were formed for the samples obtained from PVA solution without any fibers whereas a spaghetti-like morphology was seen for the samples V15 and V25. X-ray diffractograms of sample V25 indicated the presence of HA phase at two temperatures of 600 and 800 °C. However, in the latter case, minor phases of beta-tricalcium phosphate and calcium oxide were also identified. In addition, the crystal size increased from 2 nm at 600 °C to 16 nm at 800 °C.SEM/EDS analyses confirmed the formation of needle-like HA on surface of V25 after 7 days of soaking in simulated body fluid (SBF). Evaluation of cell growth demonstrated that human osteoblast-like cells were attached, spread, and grown well on the surface of V25. This event could be a good sign of biocompatibility of the fibers.
Keywords: Calciumphosphate sol . PVA and PVP solution . Electrospun nanofibers . Heat treatment . Hydroxyapatite phase . Apatite formation . Osteoblast-like cells
Application: Optimizing Electrospinning Parameters
Product Model 1: Electroris (ES1000)
Product Model 2:
URL: http://link.springer.com/article/10.1007/s41779-017-0028-8#="http://link.springer.com" & "/article/10.1007/s41779-017-0028-8"#